M-estimator based Chinese Remainder Theorem with few remainders using a Kroenecker product based mapping vector

The Chinese Remainder Theorem (CRT) explains how to estimate an integer-valued number from the knowledge of the remainders obtained by dividing such unknown integer by co-prime integers. As an algebraic theorem, CRT is the basis for several techniques concerning data processing. For instance, considering a single-tone signal whose frequency value is above the sampling rate, the respective peak in the DFT informs the impinging frequency value modulo the sampling rate. CRT is nevertheless sensitive to errors in the remainders, and many efforts have been developed in order to improve its robustness. In this paper, we propose a technique to estimate real-valued numbers by means of CRT, employing for this goal a Kroenecker based M-Estimation (ME), specially suitable for CRT systems with low number of remainders. Since ME schemes are in general computationally expensive, we propose a mapping vector obtained via Kroenecker products which considerably reduces the computational complexity. Furthermore, our proposed technique enhances the probability of estimating an unknown number accurately even when the errors in the remainders surpass 1/4 of the greatest common divisor of all moduli. We also provide a version of the mapping vectors based on tensorial n-mode products, delivering in the end the same information of the original method. Our approach outperforms the state-of-the-art CRT methods not only in terms of percentage of successful estimations but also in terms of smaller average error.     

Misconceptions of human factors concepts

Abstract

Like many scientific topics, Human Factors, and Ergonomics concepts are susceptible to being misunderstood by people unfamiliar with the subject matter. Most of the time these misunderstandings are harmless, like when a safety poster within a work setting encourages employees to 'overcome complacency'. This misunderstanding of complacency suggests it is a motivational aspect of human behaviour correctable with encouragement, whereas the human factors approach to overcoming complacency would be to evaluate how task design could diminish the destructive consequences of unexpected changes within a routine setting. No harm comes from the message within the safety poster, other than some wasted ink and paper, but misconceptions among particular audiences can eventually result in dire consequences for the human operator. This paper presents recent evidence that the concepts are being misapplied by casual consumers of human factors, particularly in the aftermath of accidents within complex systems, in ways detrimental to the core mission of improving the well-being of the human operator. Later, because this special issue presents new ways to demonstrate value via return on investment, practical efforts we can take to overcome such misconceptions are suggested.     

On the numerical solution of Fredholm integral equations utilizing the local radial basis function method

The current investigation describes a computational technique to solve one- and two-dimensional Fredholm integral equations of the second kind. The method estimates the solution using the discrete collocation method by combining locally supported radial basis functions (RBFs) constructed on a small set of nodes instead of all points over the analysed domain. In this work, we employ the Gauss–Legendre integration rule on the influence domains of shape functions to approximate the local integrals appearing in the method. In comparison with the globally supported RBFs for solving integral equations, the proposed method is stable and uses much less computer memory. The scheme does not require any cell structures, so it is meshless. We also obtain the error analysis of the proposed method and demonstrate that the convergence rate of the approach is high. Illustrative examples clearly show the reliability and efficiency of the new method.     

一种图像校正的偏振光罗盘系统的研究

导航传感器在探险、应急、精确制导武器、船舶、航空器导航和定位系统中起着关键作用。针对偏振光罗盘在倾斜状态下误差较大的问题,提出了一种利用加速度计和陀螺仪对偏振光罗盘进行图像校正的方法,设计了一种基于陀螺仪校正的偏振光罗盘系统。首先利用加速度计和陀螺仪计算得到载体姿态角,对偏振光图像数据进行图像校正,采用Stokes矢量法解算大气偏振模式分布,进而提取导航特征点,最后对特征点进行拟合解算出航向角信息。并且进行了静态和动态测试实验,实验结果表明,该算法能够有效的对偏振光罗盘姿态变化引起的误差进行补偿,可以将偏振光罗盘的航向角测量误差控制在1.86°之内,平均误差为0.09°。     

Chaos-Based transmitted-reference ultra-wideband communications

Transmitted-reference (TR) ultra-wideband (UWB) communication systems have gained increasing popularity for the usage in the low data rate application, due to its non-coherent receiver structure. In conventional TR system, non-coherency at the receiver is achieved by sending reference pulses prior to the data-bearing pulses. Then, at the receiver side, reference pulses are used as template signals for correlation with data-bearing pulses. Therefore, the orthogonality between reference and data pulses is obtained in time division multiple access (TDMA) fashion. However, the implementation of a wideband delay line is very difficult in the current low power integrated circuits. In this paper, a TR method called Chaos-Based TR (CB-TR) is proposed. In the proposed method, chaotic sequences are used to separate the reference and data pulses. Such approach exploits the benefits of chaotic signals, such as non-periodicity, easy-to-generate, impulse-like autocorrelation value and low cross-correlation value. Furthermore, in order to decrease the influence of some negative properties of conventional chaotic maps, a modified chaotic generator (MCS) is proposed. Simulation results over the IEEE 802.15.4a channel model show comparable bit error rate performance to other TR methods.     

读懂衡器的最大允许误差

本文主要讨论衡器的检定分度数能否大于传感器的最大检定分度数nmax,这是一直困扰大家和争论不休的问题。作者由分析最大允许误差mpe本质入手,指出mpe是人为规定的误差,不是传感器实际的物理特性。通过理论分析得出的对单只传感器的衡器,n≤nmax和v≥vmin的误差限原则是不能违背的。对于四只传感器的衡器,不受上述误差限原则限制。     

在轨维修后端模块接口机构的研究

在轨维修可以大大的延长空间科学仪器的使用寿命,节省大量的经济成本。为了实现空间望远镜后端模块的在轨操作和更换,设计了一套与之对应的接口机构,能够解决在轨快速定位与安装。根据321运动学定位准则,详细介绍了该接口机构的内部组成和工作原理;然后把该接口机构与后端模块进行组件级有限元仿真,仿真结果表明一阶模态远高于整机基频可以有效地避免发射时候的共振;设计了一套平面内的工装来模拟后端模块,利用等效质量法对整个机构进行重力卸载;搭建实验平台,利用激光跟踪仪来测量整个后端模块的重复定位安装精度,实验数据表明,X,Y,Z 3个方向的重复平移定位误差分别为±5.58μm,±3.24μm及±3.63μm,优于总体指标±10μm;热实验结果表明整个机构可以完全释放由于温度变化产生的形变,具有很高的热稳定性;使入射光线和靶面的相对位置持续稳定,保证了较高的成像质量。为其他空间在轨维护装置提供强有力的参考价值。     

基于一种改进逐点比较插补法的激光打标机控制加工算法

在激光打标系统中,逐点比较插补法是一种普遍使用的算法。这种算法在控制激光运动轨迹和对图像轨迹的拟合过程中,起到极其重要的作用。由于逐点比较插补法具有运算直观,脉冲输出均匀,调节方便等特点,所以是一种较为适合打标机系统应用的插补算法。但是传统的逐点比较插补算法存在精度低和速度慢等问题。为了改善该算法的性能,对传统逐点比较插补算法进行了改进,并进行了计算和模拟仿真。结果表明改进比较插补算法在精度和速度上都有明显提高。     

A PV installation framework concerning electricity variable rates

This paper assesses building integrated photovoltaic (BIPV) installation parameters based on the profit generated by a photovoltaic system. It takes into consideration a home building case study and it investigates its monthly energy demand based on a specific location and a typical occupancy. The capability of a photovoltaic (PV) system to generate more profit occurs when solar intensity is maximum while the electric energy price is at its highest rate. The paper traces a framework that encompasses different aspects such as energy demand, energy price, and solar intensity. This framework identifies profit alternatives according to different installation parameters. A tool that predicts a PV installation hourly electric energy production is developed. The profit generated is simulated for home buildings located in Beirut (Lebanon) and Xihua (China), both at 33.8° latitude north. The paper highlights a new approach for BIPV installations, taking into account weather conditions, energy demand, and electric energy utility rates.     

Systematic convergence of nonlinear stochastic estimators on the Special Orthogonal Group SO(3)

This paper introduces two novel nonlinear stochastic attitude estimators developed on the Special Orthogonal Group with the tracking error of the normalized Euclidean distance meeting predefined transient and steady‐state characteristics. The tracking error is confined to initially start within a predetermined large set such that the transient performance is guaranteed to obey dynamically reducing boundaries and decrease smoothly and asymptotically to the origin in probability from almost any initial condition. The proposed estimators produce accurate attitude estimates with remarkable convergence properties using measurements obtained from low‐cost inertial measurement units. The estimators proposed in continuous form are complemented by their discrete versions for the implementation purposes. The simulation results illustrate the effectiveness and robustness of the proposed estimators against uncertain measurements and large initialization error, whether in continuous or discrete form.